Turning The Handlebars To The Side - Hercules Montfoort Operating Instructions Manual

6.2.2
CAUTION
!
Figure 43:
034-11572_1.0_29.08.2018
urning the handlebars to the side
T
Alternative
Crash caused by incorrectly set clamping force
Excessively high clamping force will damage the quick
release and cause it to lose its function.
Insufficient clamping force will cause a detrimental
transmission of force. This will result in a crash and
injuries.
 Never fasten a quick release using a tool (e.g.
hammer or pliers).
 Only use the clamping lever with the specified set
clamping force.
 Open the clamping lever.
 Pull the locking lever on the stem up, and
simultaneously pivot the handlebars into the
desired position.
 You feel the locking lever click into place.
 Pull out the handlebars to the required height.
 Lock the quick release.
Pulling locking lever upwards – example: by.schulz speed lifter
Before the fist ride
87