Assembly; Required Tools - Hercules Montfoort Operating Instructions Manual

5.3
CAUTION
!
Table 27:
5.3.1
034-11572_1.0_29.08.2018

Assembly

Crushing caused by unintentional activation
There is a risk of injury if the drive system is activated
unintentionally.
 Remove the battery if the battery is not absolutely
necessary for assembly.

Assemble the bicycle in a clean and dry environment.

The working environment temperature should be
between 15 °C and 25 °C.
Working environment temperature
Working environment temperature

If a fitting stand is used, it must be approved for a
maximum weight of 30 kg.

To reduce the weight, we recommend that you always
disconnect the battery from the bicycle for the duration
of use of the fitting stand.

Required tools

The following tools are required to assemble the
bicycle:
• Knife
• Hexagon socket spanner 2 (2.5 mm, 3, mm 4 mm,
5 mm, 6 mm and 8 mm)
• Torque wrench with working range between 5 and
40 Nm
• Twelve-point square socket T-25
• Ring spanner (8 mm, 9 mm,10 mm, 13 mm, 14 mm
and 15 mm) and
• Cross, flat head and ordinary screwdriver.
Transportation, storage and assembly
15 °C–25 °C
61