Adjusting The Handlebar Height - Hercules Montfoort Operating Instructions Manual

Before the fist ride
6.2.1
CAUTION
!
Figure 42:
86

Adjusting the handlebar height

Crash caused by incorrectly set clamping force
Excessively high clamping force will damage the quick
release and cause it to lose its function. Insufficient
clamping force will cause a detrimental transmission of
force. This can cause components to break. This will
result in a crash and injuries.
 Never fasten a quick release using a tool (e.g.
hammer or pliers).
 Only use the clamping lever with the specified set
clamping force.
 Open the clamping lever.
 Pull the locking lever on the stem up, and
simultaneously pivot the handlebars into the
desired position.
 You feel the locking lever click into place.
 Pull out the handlebars to the required height.
 Lock the quick release.
Open (2) and closed (1) clamping lever on the stem – example:
by.schulz speed lifter
1
2
034-11572_1.0_29.08.2018