Electric Drive System; Switching On The Drive System - Hercules Montfoort Operating Instructions Manual

Operation
7.6
7.6.1
CAUTION
!
114

Electric drive system

Switching on the drive system

Crash caused by lack of readiness for braking
When it is switched on, the drive system can be
activated by the application of force on the pedals.
There is a risk of a crash if the drive is activated
unintentionally, and the brake is not reached.
 Never start the electric drive system, or switch it off
immediately, if the brake cannot be reached safely
and reliably.

A sufficiently charged battery has been inserted on the
bicycle.

The display has been inserted correctly into the
mount.

The battery is firmly in place. The key has been
removed.
There are three options for switching on the drive
system.
1 Battery On-Off button
 Press the On-Off button (battery) once.
2 Display On-Off button
 Press the On-Off button (display) once.
3 Switched-on display
 If the display is already switched on when it is
inserted into its mount, the electric drive system is
switched on automatically.
 After switching on, a speed of 0 K M /H is displayed
on the display. If this is not the case, you must
check whether the display has been engaged
properly in place.
034-11572_1.0_29.08.2018