7.6.2
034-11572_1.0_29.08.2018
If the drive system is switched on, the drive is
activated as soon as the pedals are moved with
sufficient force (except if in push assist mode or the
level of assistance is "OFF").
The motor power is determined by the level of
assistance set on the display.
As soon as the system has been activated,
A C T I V E L I N E / P ER F O R M A N C E L I N E appears
briefly on the display.
Switching off the drive system
As soon as you stop pushing the pedals in normal
mode or reach a speed of 25 km/h, the drive system
switches off the assistance system. The assistance
system starts up again if you push the pedals and your
speed is less than 25 km/h.
The system switches off automatically ten minutes
after the last command. There are three options for
switching off the drive system manually.
1 Display On-Off key
Press the On-Off button (display) once.
2 Battery On-Off key
Press the On-Off button (battery).
3 Removing the display
Remove the display from the mount.
The LEDs of the operating and charge status
indicator go out.
Operation
115