Using The Usb Port; Switching On The Display; Switch Off Screen - Hercules Montfoort Operating Instructions Manual

7.7.4
NOTICE
7.7.5
7.7.6
034-11572_1.0_29.08.2018

Using the USB port

Any moisture which enters through the USB port may
trigger a short circuit in the display.
 Regularly check the position of the rubber cover on
the USB port and adjust it as necessary.
The USB port can be used to operate external devices
which can be connected using a standard micro A/
micro B USB 2.0 cable.
 Open the protective flap on the USB port.
 Replace the protective flap after using the USB
port.

Switching on the display

 Press the On-Off button (display) briefly once.
 The electric drive system is switched on.

Switch off screen

If the display is not inserted into the bracket, it will
switch off automatically after one minute to save
energy if no button is pressed.
 Press the On-Off button (display) briefly once.
 The electric drive system is switched off.
Operation
121