Using The Push Assist - Hercules Montfoort Operating Instructions Manual

Operation
7.7.7
CAUTION
!
122

Using the push assist

Injury from pedals or wheels
The pedals and the drive wheel turn when the push
assist system is used. There is a risk of injury if the
bicycle wheels are not in contact with the ground when
the push assist system is used (e.g.when carrying the
bicycle up stairs or when loading a bike rack).
 Only use the push assist mode when pushing the
bicycle.
 You must steer the bicycle securely with both hands
when using push assist.
 Allow for enough freedom of movement for the
pedals.
The push assist helps the rider to push the bicycle.
The speed can be a maximum of 6 km/h in this case.

The tractive power of the push assist and its speed
can be influenced by the selection of gear. To spare
the drive, first gear is recommended for travelling
uphill.

The level of assistance O FF must not be selected.
 Press the push assist button once to activate the
push assist.
 Press and hold the plus button within 3 seconds to
switch on the push assist.
 Release the plus button to shut off the push assist.
The push assist system switches off automatically
as soon as the bicycle wheels are blocked or the
speed exceeds 6 km.
034-11572_1.0_29.08.2018