Using A Hub Gear - Hercules Montfoort Operating Instructions Manual

Operation
7.8.3
CAUTION
!
NOTICE
NOTICE
NOTICE
128

Using a hub gear

Alternative
Crash caused by incorrect use
If the rider applies too much pressure on the pedals
during a gear change and activates the shifter or
changes several gears at a time, their feet may slip
from the pedals. The bicycle may flip over or fall, which
may cause injuries.
Switching down several gears to a low gear may cause
the twist grip outer sleeve to suddenly come off. This
will not have an adverse effect on the twist grip's
correct functioning since the outer guide returns to its
original position after the gear change is complete.
 Apply little pressure on the pedals while changing
gears.
 Never change more than one gear at a time.
The interior hub is not completely waterproof. If water gets
into the hub, it may rust and the gear switch function may
no longer function as a result.
 Never use the bicycle in places where water may
get into the hub.
In rare cases, noises may be heard from the rear
derailleur in the hub interior after a gear change. This is
normal when gears are changed.
Do not detach the hub. If you need to detach it, contact
your dealer.
034-11572_1.0_29.08.2018