1. Remove the top cover (on page 33).
2. Remove the light engine fan pack (on page 48).
3. Remove the light dump (on page 78).
4. Disconnect the three mini-SAS cables from the card cage.
5. Disconnect the two coolant hoses to the light engine.
6. Disconnect the J89 shutter harness from the housekeeping board (HKBB).
7. Loosen the three captive screws securing the light engine to the projector base.
8. Remove the light engine from the projector.
4K40-RGB Series Service Guide–D4K40-RGB, Roadie 4K40-RGB, Mirage 4K40-RGB
020-102960-02 Rev. 1 (12-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Optics
79