Christie 4K40-RGB Series Service Manual page 61

5. For both power supply modules, disconnect the DC output cables from the positive and
negative terminals using a 6 mm driver and 13 mm open-jaw wrench. Retain all screws, nuts,
washers, and lock washers.
6. Loosen the three captive fasteners securing the power supply module to the projector system.
4K40-RGB Series Service Guide–D4K40-RGB, Roadie 4K40-RGB, Mirage 4K40-RGB
020-102960-02 Rev. 1 (12-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Electronics
61