7.1 Set Motion Detection Alarm
Enter a short description of your task here (optional).
Steps
1. Go to Menu → Camera → Motion and choose a camera you want to set up motion detection.
2. Set up detection area and sensitivity.Tick Enable Motion Detection, use the mouse to draw
detection area(s) and drag the sensitivity bar to set sensitivity.Click
actions.
3. Click Trigger Channel and select one or more channels which will start to record/capture or
become full-screen monitoring when motion alarm is triggered, and click Apply to save the
settings.
Network Video Recorder User Manual
Chapter 7 Event and Alarm
Figure 7-1 Motion Detection Setup Interface
Figure 7-2 Set Trigger Camera of Motion Detection
75
and set alarm response