Configure Email - HIKVISION DS-7100NI-K1/W/M Series User Manual

2. Select More Settings to enter the More Settings interface.
3. Configure the remote alarm host, server port, HTTP port, multicast, RTSP port.
Alarm Host IP/Port
With a remote alarm host configured, the device will send the alarm event or exception
message to the host when an alarm is triggered. The remote alarm host must have the CMS
(Client Management System) software installed. The Alarm Host IP refers to the IP address of
the remote PC on which the CMS (Client Management System) software (e.g., iVMS-4200) is
installed, and the Alarm Host Port must be the same as the alarm monitoring port configured
in the software (default port is 7200).
Multicast IP
The multicast can be configured to realize live view for more than the maximum number of
cameras through network. A multicast address spans the Class-D IP range of 224.0.0.0 to
239.255.255.255. It is recommended to use the IP address ranging from 239.252.0.0 to
239.255.255.255. When adding a device to the CMS (Client Management System) software,
the multicast address must be the same as the device's multicast IP.
RTSP Port
The RTSP (Real Time Streaming Protocol) is a network control protocol designed for use in
entertainment and communications systems to control streaming media servers. The default
RTSP port is 554, and you can change it according to different requirements.
Server Port and HTTP Port
The Server Port should be set to the range of 2000-65535 and it is used for remote client
software access. The HTTP port is used for remote IE access.The default Server Port is 8000
and the HTTP Port is 80, and you can change them according to different requirements.
4. Click Apply to save and exit the interface.

8.3.4 Configure Email

The system can be configured to send an email notification to all designated users if an alarm
event is detected, etc., an alarm or motion event is detected or the administrator password is
changed.
Before You Start
NVR must be connected to a local area network (LAN) that maintains an SMTP mail server. The
network must also be connected to either an intranet or the Internet depending on the location of
the e-mail accounts to which you want to send notification.
Network Video Recorder User Manual
Figure 8-3 Configure More Settings
93