Add Network Cameras; Activate The Ip Camera - HIKVISION DS-7100NI-K1/W/M Series User Manual

1.2 Add Network Cameras

1.2.1 Activate the IP Camera

Before adding the camera, make sure the IP camera to add is in active status.
Steps
1. Enter the IP camera management interface.
– Select the Add IP Camera option from the right-click menu in live view mode.
– click Menu → Camera → Camera
Note
For the IP camera detected online in the same network segment, the Password status shows
whether it is active or inactive.
2. Click the inactive icon of the camera to enter the following interface to activate it. You can also
select multiple cameras from the list and click the One-touch Activate to activate the cameras
in batch.
3. Set the password of the camera to activate it.
Use IP Camera Activation Password
The camera(s) will use the password which you have set during the device activation.
Create New Password
Network Video Recorder User Manual
Figure 1-6 IP Camera Management Interface
5