HIKVISION DS-7100NI-K1/W/M Series User Manual page 26

channel to connect by selecting the channel port No. in the dropdown list.
2. Click OK to save the settings and exit the editing interface.
3. Edit advanced parameters.
1) Drag the horizontal scroll bar to the right side and click
2) You can edit the network information and the password of the camera.
3) Click OK to save the settings and exit the interface.
Note
To connect the network cameras which are not configured with the standard protocols, you can
configure the customized protocols for them.
4. Configuring the customized protocols.
1) Click Protocol in the custom adding IP camera interface to enter the protocol management
interface.
Network Video Recorder User Manual
Figure 1-13 Paramerters Configuration of the Camera
.
12