HIKVISION DS-7100NI-K1/W/M Series User Manual page 120

3. Set parameters for the new user.
Password
Set the password for the user.
Level
Set the user level to Operator or Guest. Different user levels have different operating
permission.
Operator
Operator has the permission of Two-way Audio in Remote Configuration and all operating
permission in Camera Configuration by default.
Guest
Guest has no permission of Two-way Audio in Remote Configuration and only has the
local/remote playback in the Camera Configuration by default.
User's MAC Address
If it is enabled, it only allows the specified MAC address to access your device.
Caution
Strong Password Recommended–We highly recommend you create a strong password of your
own choosing (using a minimum of 8 characters, including at least three of the following
categories: upper case letters, lower case letters, numbers, and special characters) in order to
increase the security of your product. We also recommend that you reset your password
regularly. Especially in the high security systems, resetting the password monthly or weekly can
better protect your product.
4. Click OK.
The added new user will be displayed on the user list.
5. Click of the user to set the user permission.
6. Set the operating permission of Local Configuration, Remote Configuration and Camera
Configuration.
Network Video Recorder User Manual
Figure 10-5 Add User
106