Use The Mouse In Live View - HIKVISION DS-7100NI-K1/W/M Series User Manual

Start Recording
continuous record and motion detection record are supported.
Output Mode
select the output mode as Standard, Bright, Gentle or Vivid.
Add IP Camera
the shortcut to the IP camera management interface.
Playback
playback the recorded videos for current day.
Aux Monitor
the NVR checks the connection of the output interfaces to define the main and auxiliary output
interfaces. The priority level for the main and aux output is HDMI > VGA.
When both the HDMI and VGA are connected, the HDMI is used as main output and the VGA is
used as the aux output.
When the aux output is enabled, the main output cannot perform any operation, and you can do
some basic operation on the live view mode for the Aux output.

3.2.1 Use the Mouse in Live View

Name
Common Menu
Menu
Single Screen
Multi-screen
Previous Screen
Next Screen
Start/Stop Auto-
switch
Start Recording
Add IP Camera
Playback
PTZ
Network Video Recorder User Manual
Table 3-2 Mouse Operation in Live View
Quick access to the sub-menus which you frequently visit.
Enter the main menu of the system by right clicking the mouse.
Switch to the single full screen by choosing channel number from the
dropdown list.
Adjust the screen layout by choosing from the dropdown list.
Switch to the previous screen.
Switch to the next screen.
Enable/disable the auto-switch of the screens.
Start continuous recording or motion detection recording of all
channels.
Enter the IP Camera Management interface, and manage the cameras.
Enter the playback interface and start playing back the video of the
selected channel immediately.
Enter the PTZ control interface.
Description
20