Configure Hdd Error Alarms - HIKVISION DS-7100NI-K1/W/M Series User Manual

2. Set Mode as Quota.
3. Select a camera for quota.
4. Enter the storage capacity in Max. Record Capacity (GB) and Max. Picture Capacity (GB).
5. Optional: Click Copy to copy the quota settings of the current camera to other cameras.
6. Click Apply.
Note
If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record
and picture capture.

9.3 Configure HDD Error Alarms

You can configure the HDD error alarms when the HDD status is "Uninitialized" or "Abnormal".
Steps
1. Go to Menu → Configuration → Exceptions.
2. Set Exception Type as HDD Error.
3. Select HDD error alarm type(s).
Network Video Recorder User Manual
Figure 9-3 Storage Mode Settings
101