Set Unlock Pattern - HIKVISION DS-7100NI-K1/W/M Series User Manual

1.1.4 Set Unlock Pattern

For the admin user, you can set the unlock pattern for device login after it is activated.
Steps
1. Use mouse to draw a pattern among the 9 dots on the screen. Release the mouse when the
pattern is done.
Note
● The pattern shall have 4 dots at least.
● Each dot can be connected for once only.
2. Draw the same pattern again to confirm it.
Note
You can go to Menu → Configuration → User, and click
pattern.
Network Video Recorder User Manual
Figure 1-5 Set Unlock Pattern
to edit or disable the unlock
4