Chapter 4 Recording; Configure Parameters - HIKVISION DS-7100NI-K1/W/M Series User Manual

4.1 Configure Parameters

By configuring the parameters you can define the parameters which affect the image quality, such
as the transmission stream type, the resolution and so on.
Before You Start
Make sure that the HDD has already been installed. If not, please install a HDD and initialize it.
(Menu → HDD → General)
Check the storage mode of the HDD.
● If the HDD mode is Quota, please set the maximum record capacity and maximum picture
capacity. For detailed information, see Configure Quota Mode.
● If the HDD mode is Group, you should set the HDD group. For detailed information, see .
Steps
1. Enter the Record settings interface to configure the recording parameters:Menu → Record →
Parameters.
Network Video Recorder User Manual

Chapter 4 Recording

Figure 4-1 HDD-General
Figure 4-2 HDD- Advanced
40