Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for HIKVISION DS-7100NI-K1/W/M Series
Summary of Contents for HIKVISION DS-7100NI-K1/W/M Series
- Page 1 Network Video Recorder Quick Start Guide...
- Page 2 Legal Information About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of this Manual at the company website Please use this Manual with the guidance and assistance of professionals trained in supporting the Product.
- Page 3 Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
- Page 4 This device meets the CAN ICES-3 (B)/NMB-3(B) standards requirements. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
- Page 5 Applicable Model This manual is applicable to the following models. Table 1-1 Applicable Model Series Model DS-7104NI-K1/W/M DS-7100NI-K1/W/M DS-7108NI-K1/W/M DS-7104NI-K1/W/M(C) DS-7100NI-K1/W/M(C) DS-7108NI-K1/W/M(C) Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury.
- Page 6 Safety Instruction ● Proper configuration of all passwords and other security settings is the responsibility of the installer and/or user. ● In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region. Please refer to technical specifications for detailed information. ●...
-
Page 7: Table Of Contents
TABLE OF CONTENTS Chapter 1 Rear Panel Interfaces Description ................8 Chapter 2 Installation and Connections ..................9 2.1 Device Installation ......................... 9 2.2 HDD Installation ........................9 2.2.1 Fix-on-Bottom Installation ..................9 Chapter 3 Menu Operation ....................... 11 3.1 Startup, Shutdown and Reboot ..................11 3.2 Activate Your Device ...................... -
Page 8: Chapter 1 Rear Panel Interfaces Description
Chapter 1 Rear Panel Interfaces Description The rear panel interfaces vary with different models. Refer to the following table for common interfaces description. Table 1-1 Common Interfaces Description of Rear Panel Item Description Item Description RCA connector for audio RCA connector for audio AUDIO IN AUDIO OUT input. -
Page 9: Chapter 2 Installation And Connections
Chapter 2 Installation and Connections 2.1 Device Installation During the device installation: ● Use brackets for rack mounting. ● Ensure ample room for audio and video cables. ● When routing cables, ensure the bend radius of the cables are no less than five times of its diameter. - Page 10 1) Connect one end of data cable to the device motherboard. 2) Connect the other end of data cable to HDD. 3) Connect one end of power cable to HDD. 4) Connect the other end of power cable to the device motherboard. Figure 2-2 Connect Cables 3.
-
Page 11: Chapter 3 Menu Operation
Chapter 3 Menu Operation 3.1 Startup, Shutdown and Reboot Proper startup and shutdown procedures are crucial to expand the life of your device. Startup Your Device Ensure the voltage of the extra power supply satisfies the requirement, and the ground connection is working properly. -
Page 12: Set Unlock Pattern
Client Software. Steps 1. Enter the password in Create New Password and Confirm New Password. Warning We highly recommend you create a strong password of your own choosing (Using a minimum of 8 characters, including at least three of the following categories: upper case letters, lower case letters, numbers, and special characters.) in order to increase the security of your product. -
Page 13: User Login
Figure 3-3 Set Unlock Pattern Note ● The pattern shall have 4 dots at least. ● Each dot can be connected for once only. 2. Draw the same pattern again to confirm it. Note You can go to Menu → Configuration → User, and click to edit or disable the unlock pattern. -
Page 14: Network Settings
Figure 3-4 Login ● For the admin, if you have entered the wrong password for 7 times, the account will be locked for 60 seconds. ● For the operator, if you have entered the wrong password for 5 times, the account will be locked for 60 seconds. - Page 15 Figure 3-6 Wi-Fi Settings 2. Configure wireless network parameters, including Network Bridging, SSID, Security Mode, and Key. Network Bridging Enable device to create a single aggregate network from multiple communication networks or network segments. SSID It is the short for Service Set Identifier. SSID is the Wi-Fi name that the device provides. Area/Country Select where the router is used.
-
Page 16: Configure Guarding Vision
3.5.3 Configure Guarding Vision Guarding Vision provides mobile phone application and platform service to access and manage your connected devices, which enables you to get a convenient remote access to the surveillance system. Steps 1. Go to Menu → Configuration → Network → Platform Access. 2. -
Page 17: Add Ip Cameras
Activation Password as its password. (Refer to Activate Your Device.) Note ● It is recommended to keep the distance between Wi-Fi camera and device within 50 meters. ● Only certain Wi-Fi camera models and versions support this function. ● Ensure the Wi-Fi camera is powered on, not activated, and has not been connected with other devices via network cable. -
Page 18: Playback
Table 3-1 Description of Live View Icons Item Description Item Description Alarm (video loss, tampering, motion detection, VCA or Alarm and Record. sensor alarm). Record (manual record, Event/Exception (event and continuous record, motion exception information, detection, VCA or alarm appears at the lower-left triggered record). -
Page 19: Access Via Web Browser
3.9 Access via Web Browser You can get access to the device via web browser. The following web browsers are supported: Internet Explorer 6.0, Internet Explorer 7.0, Internet Explorer 8.0, Internet Explorer 9.0, Internet Explorer 10.0, Apple Safari, Mozilla Firefox, and Google Chrome. The supported resolutions include 1024*768 and above. - Page 20 Guarding Vision for iOS Users Guarding Vision for Android Users UD18419N...
Need help?
Do you have a question about the DS-7100NI-K1/W/M Series and is the answer not in the manual?
Questions and answers