Detect Video Loss Alarm - HIKVISION DS-7100NI-K1/W/M Series User Manual

8. If you want to set handling action of another alarm input, repeat the above steps.Or you can
click Copy on the Alarm Input Setup interface and check the checkbox of alarm inputs to copy
the settings to them.

7.3 Detect Video Loss Alarm

Detect video loss of a channel and take alarm response action(s).
Steps
1. Go to Menu → Camera → Video Loss.
2. Select a channel you want to detect.
3. Check Enable Video Loss Alarm.
4. Click Settings button to set up handling action of video loss.
5. Set up arming schedule of the handling actions.
1) Select Arming Schedule.
Network Video Recorder User Manual
Figure 7-8 Copy Settings of Alarm Input
Figure 7-9 Video Loss Setup
79