Configure Network Detection; Test Network Delay And Packet Loss - HIKVISION DS-7100NI-K1/W/M Series User Manual

Network Video Recorder User Manual
Figure 8-7 Network Traffic
2. You can view the sending rate and receiving rate information on the interface. The traffic data is
refreshed every 1 second.

8.5 Configure Network Detection

You can obtain network connecting status of NVR through the network detection function,
including network delay, packet loss, etc.

8.5.1 Test Network Delay and Packet Loss

Steps
1. Go to Menu → Maintenance → Net Detect.
2. Enter Destination Address.
Figure 8-8 Network Detection
3. Click Test to start testing network delay and packet loss.
Result
The testing result pops up on the window. If the testing is failed, the error message box will pop up
as well.
97