2. Click
to edit the HDD you want to protect.
Note
To edit HDD property, you need to set the storage mode of the HDD to Group.
3. Set the HDD property to Read-only.
4. Click OK to save settings and back to the upper level menu.
Note
● You cannot save any files in a Read-only HDD. If you want to save files in the HDD, change the
property to R/W.
● If there is only one HDD and is set to Read-only, the NVR can't record any files. Only live view
mode is available.
● If you set the HDD to Read-only when the NVR is saving files in it, then the file will be saved in
next R/W HDD. If there is only one HDD, the recording will be stopped.
Network Video Recorder User Manual
Figure 4-29 HDD General
Figure 4-30 HDD General- Editing
58