HIKVISION DS-7100NI-K1/W/M Series User Manual page 47

Speed
defines the speed at which the PTZ will move from one key point to the next.
5. Click Add to add the next key point to the patrol, or you can click OK to save the key point to the
patrol.
6. Optional: You can delete all the key points by clicking Clear for the selected patrol, or clickClear
All to delete all the key pints for all patrols.
Call Patrols
Calling a patrol makes the PTZ to move according the predefined patrol path.
Steps
1. Click PTZ in the lower-right corner of the PTZ setting interface, or press the PTZ button on the
front panel, or click the PTZ Control icon
the right-click menu to show the PTZ control panel.
2. Click the button to show the general settings of the PTZ control.
3. Select a patrol and click Call Patrol to call it.
4. You can click Stop Patrol to stop calling it.
Customize Patterns
Patterns can be set by recording the movement of the PTZ. You can call the pattern to make the
PTZ movement according to the predefined path.
Steps
1. Go to Menu → Camera → PTZ, and enter the PTZ Control interface.
Network Video Recorder User Manual
Figure 3-17 PTZ Panel - General
in the quick setting bar, or select the PTZ option in
33