Ptz Control Panel - HIKVISION DS-7100NI-K1/W/M Series User Manual

3. Click Linear Scan to start the linear scan and click the Linear Scan button again to stop it
4. You can click Restore to clear the defined left limit and right limit data and the dome needs to
reboot to make settings take effect.

3.5.3 PTZ Control Panel

To enter the PTZ control panel, there are two ways supported.
● OPTION 1:In the PTZ settings interface, click the PTZ button on the lower-right corner which is
next to the Back button.
● OPTION 2:In the Live View mode, you can press the PTZ Control button on the front panel or on
the remote control, or choose
Click Configuration on the control panel, and you can enter the PTZ Settings interface.
Network Video Recorder User Manual
Figure 3-21 PTZ Panel - One-touch
, or select the PTZ option in the right-click menu.
37