Single Word Distribute - Dist(80); Data Collect - Coll(81) - Omron SYSMAC C2000H Operation Manual

Data Movement
Flags
5-14-6 SINGLE WORD DISTRIBUTE – DIST(80)
Limitations
Description
Flags
5-14-7 DATA COLLECT – COLL(81)
E1
If you want to exchange content of blocks whose size is greater than 1 word,
use work words as an intermediate buffer to hold one of the blocks using
XFER(70) three times.
Indirectly addressed DM word is non-existent. (Content of *DM word
ER:
is not BCD, or the DM area boundary has been exceeded.)
Ladder Symbols
DIST(80) @DIST(80)
S
DBs
Of
Of must be BCD. DBs must be in the same data area as DBs+Of.
When the execution condition is OFF, DIST(80) is not executed. When the
execution condition is ON, DIST(80) copies the content of S to DBs+Of,
i.e.,Of is added to DBs to determine the destination word.
S
3 4 5 2
ER: The specified offset data is not BCD, or when added to the DBs, the
resulting address lies outside the data area of the DBs.
Indirectly addressed DM word is non-existent. (Content of *DM word
is not BCD, or the DM area boundary has been exceeded.)
EQ: ON when the content of S is 0; otherwise OFF.
Ladder Symbols
COLL(81) @COLL(81)
SBs
Of
D
E2
IR, SR, AR, DM, HR, TC, LR, #
DBs: Destination base word
S
DBs
Of
IR, AR, DM, HR, TC, LR, #
DBs + Of
3 4 5 2
IR, SR, AR, DM, HR, TC, LR
SBs
IR, AR, DM, HR, TC, LR, #
Of
D
Section 5-14
Operand Data Areas
S: Source data
IR, AR, DM, HR, TC, LR
Of: Offset data (BCD)
Operand Data Areas
SBs: Source base word
Of: Offset data (BCD)
D: Destination word
IR, AR, DM, HR, TC, LR
139