Single Word Distribute - Dist(80); Data Collect - Coll(81) - Omron C200H Operation Manual

Data Movement
Description
Flags
5-14-8 SINGLE WORD DISTRIBUTE – DIST(80)
Limitations
Description
Flags
5-14-9 DATA COLLECT – COLL(81)
138
When the execution condition is OFF, XCHG(73) is not executed. When the
execution condition is ON, XCHG(73) exchanges the content of E1 and E2.
E1
If you want to exchange content of blocks whose size is greater than 1 word,
use work words as an intermediate buffer to hold one of the blocks using
XFER(70) three times.
Indirectly addressed DM word is non-existent. (Content of *DM word
ER:
is not BCD, or the DM area boundary has been exceeded.)
Ladder Symbols
DIST(80) @DIST(80)
S
DBs
Of
Of must be a BCD. DBs must be in the same data area as DBs+Of.
When the execution condition is OFF, DIST(80) is not executed. When the
execution condition is ON, DIST(80) copies the content of S to DBs+Of,
i.e.,Of is added to DBs to determine the destination word.
S
3 4 5 2
ER: The specified offset data is not BCD, or when added to the DBs, the
resulting address lies outside the data area of the DBs.
Indirectly addressed DM word is non-existent. (Content of *DM word
is not BCD, or the DM area boundary has been exceeded.)
EQ: ON when the content of S is zero; otherwise OFF.
Ladder Symbols
COLL(81) @COLL(81)
SBs
Of
D
E2
IR, SR, AR, DM, HR, TC, LR, #
DBs: Destination base word
S
DBs
Of
IR, AR, DM, HR, TC, LR, #
DBs + Of
3 4 5 2
IR, SR, AR, DM, HR, TC, LR
SBs
IR, AR, DM, HR, TC, LR, #
Of
D
Section 5-14
Operand Data Areas
S: Source data
IR, AR, DM, HR, TC, LR
Of: Offset data (BCD)
Operand Data Areas
SBs: Source base word
Of: Offset data (BCD)
D: Destination word
IR, AR, DM, HR, TC, LR