File Memory Verify - Omron SYSMAC C2000H Operation Manual

File Memory Operations
7-3-3

File Memory Verify

Key Sequence
[ Start address ]
270
Continued from previous page.
Aborting during operation
The File Memory Verify operation compares data either in program memory
or in a data area with data stored in the FM area. If the two sets of data differ,
a "VER ERR" message will be displayed on the Programming Console.
When data in program memory is being verified, this operation compares
program memory data starting at the specified address and ranging to
END(01), to FM data starting at a specified block (the start block).
When data in a data area is being verified, this operation compares data be-
tween the specified start word and the last word in the particular data area, to
data in an FM area. For DM area verification, you must specify the number of
blocks to be verified (one block consists of 128 words).
[ Start block ]
[ Start DM Wd ]
[ Start Wd ]
(AR)
Changing numbers
[ No. of blocks ]
Section 7-3
[ Start block ]