Festo CPX Series Manual page 140

A. Technical appendix
A.2 Technical data of bus node CPX−M−FB34
General properties of CPX−M−FB34
General technical data
Protection class through housing
according to EN 60529, completely mounted,
plug connector inserted or provided with
protective cap
Protection against electric shock
Protection against direct and indirect contact as
per IEC/DIN EN 60204−1
Module code (CPX−specific)
Remote I/O
Remote controller
Module code (in the PLC, in the CPX−FMT or
CPX−MMI handheld)
Remote I/O
Remote controller
Power supply CPX−M−FB34
Operating voltage / load voltage
Intrinsic current consumption of bus node at 24 V
from operating voltage supply for electronics/
sensors (V )
EL/SEN
Galvanic isolation
PROFINET interfaces for V
Power failure bridging time
A−4
EL/SEN
See CPX System Description P.BE−CPX−SYS−...
IP65/IP67
By means of PELV power circuit
(Protected Extra−Low Voltage)
216
165
FB34−RIO ProfiNet RJ45 Remote I/O
FB34−RC ProfiNet RJ45 bus node
See CPX System Description P.BE−CPX−SYS−...
typ. 120 mA
(internal electronics)
Through a transformer (up to 1500 V)
10 ms
Festo P.BE−CPX−PN IO−EN en 1008b