Select Cpx Terminal (Station Selection) - Festo CPX Series Manual

2. Commissioning

2.6.2 Select CPX terminal (station selection)

Fig. 2/6: Station selection using Siemens STEP 7 − HW Config
2−30
1. Start the PROFINET hardware configuration in your
configuration and programming software (e. g. HW Config
in Siemens STEP 7).
1
3
2. If the Hardware Catalogue has not been opened:
Click on the catalogue symbol ( 1 in Fig. 2/6) or use the
keyboard combination [Ctrl] + [K].
The hardware catalogue is displayed.
2
Festo P.BE−CPX−PN IO−EN en 1008b