► Remote Access
1
From a PC run a standard web browser (Chrome recommended).
2
On the address bar write the address to remotely access the meter.
3
If the connection is successful, it should appear on screen the webControl
welcome screen (see figure). This screen shows the meter model and serial
number.
4
Enter the password and press OK (password by default is Password).
NOTE:
If you have follow these instructions and you fail to connect the
webControl, please contact PROMAX technical assistance and we will help
you (promax@promax.es).
Password Recovery
►
If after changing the webControl password you forget it, click on "forgot
password?". It opens a window with some instructions to reset the password.
Follow these steps:
A one-time temporary password will be emailed to you, so that you can log in
and modify your password.
1
Send
(promax@promax.es) with the following information:
March 2020
an
e-mail
to
Figure 38.
the
PROMAX
technical
64
assistance
service
Chapter 5: WEBCONTROL
Need help?
Do you have a question about the Cable Ranger+ and is the answer not in the manual?