NEC DS1000 Correspondence Course Workbook page 153

NEC America
DS1000/2000 Correspondence Course
Default Setting
In universal slot, Trunk Group Routing (dial 9) is assigned to trunk group 0.
DS2000
U Slot Prior to 02.01.07
Keys 1-12 are line keys for trunks 1-12.
Trunk Group Routing (dial 9) is assigned to trunk group 0 (which
contains trunks 1-8). Dial 9 works by default. The outgoing trunk
priority for the dial 9 group is as follows:
Order 1 = trunk 8
Order 2 = trunk 7
Order 3 = trunk 6
Order 4 = trunk 5
All extensions have full access on all trunks.
Introduces User Programmable Feature steps for line keys.
U Slot 02.01.07 and Higher
Keys 1-12 are line keys for trunks 1-12. In DS2000 software ver-
sions 02.01.07 through 02.02.00, Programmable Function Keys are
undefined for all extensions above 315.
All extensions have full access on all trunks.
Trunk Group assignments are not defined, so there is no Trunk
Group Routing (dial 9) by default.
DS1000
Keys 1-6 are line keys for trunks 1-6.
All extensions have full access on all trunks.
Trunks 4-6 require the Expansion Board.
All versions have User Programmable Feature steps for line keys.
DS1000 prior to 02.00.09
Trunk Group assignments are not defined, so there is no Trunk
Group Routing (dial 9) by default.
DS1000 02.00.09 and Higher
Trunk Group Routing (dial 9) is assigned to trunk group 0 (which
contains trunks 1-6). Dial 9 works by default. The outgoing trunk
priority for the dial 9 group is as follows:
Order 1 = trunk 6
Order 2 = trunk 5
Order 3 = trunk 4
System Programming
Order 5 = trunk 4
Order 6 = trunk 3
Order 7 = trunk 2
Order 8 = trunk 1
Order 4 = trunk 3
Order 5 = trunk 2
Order 6 = trunk 1
DS1000/2000 Workbook 153