NEC DS1000 Correspondence Course Workbook page 141

NEC America
DS1000/2000 Correspondence Course
18. Enter the extension's Access Level (0-5) +
OR
Press to leave the current entry unchanged
VOL
1801: STATION #nnn
OVRFLW EXT?nnn
The previously programmed value displays.
19. Enter the extension's overflow destination (300-395) +
OR
Press to leave the current entry unchanged
VOL
1801: STATION #nnn
ICM OVRFLW B-R-D?n
The previously programmed value displays.
20. Enter the overflow condition for Intercom calls (0 = no overflow, 1 = busy, 2 =
ring, 3 = delay) +
OR
Press to leave the current entry unchanged
VOL
1801: STATION #nnn
CO OVRFLW B-R-D?n
The previously programmed value displays.
21. Enter the overflow condition for trunk calls (0 = no overflow, 1 = busy, 2 =
ring, 3 = delay) +
OR
Press to leave the current entry unchanged
VOL
1801: STATION #nnn
DID OVRFLW B-R-D?n
The previously programmed value displays.
22. Enter the overflow condition for DID calls (0 = no overflow, 1 = busy, 2 = ring,
3 = delay) +
VOL
OR
Press to leave the current entry unchanged
VOL
1801: STATION #nnn
E&M OVRFLW B-R-D?n
The previously programmed value displays.
23. Enter the overflow condition for tie line calls (0 = no overflow, 1 = busy, 2 =
ring, 3 = delay) +
OR
Press to go back to the first option for this port.
VOL
1801: STATION #nnn
PT TYP?n
The previously programmed value displays.
24. Press to select another station port to program.
CONF
OR
Press twice to exit this program.
CONF
VOL
VOL
VOL
System Programming
VOL
VOL
DS1000/2000 Workbook 141