NEC DS1000 Correspondence Course Workbook page 15

The shaded rows below show the Fixed Slot software User Programmable Features.
Call Coverage
Group Call Pickup
Off Hook Signaling and
Paging (Incoming)
Prime Line Assignment
NEC America
DS1000/2000 Correspondence Course
You can refer to the DS1000/2000 Software Manual for more information on
what each program does as well as information on programming the keys.
Depending on your software version (2.00.00 or higher required) and the access
level assigned to the extension (Program 1801), an end user can also customize
their phone with the User Programmable Features.
Note: The previous Speed Dial programming procedures (##2 for System Speed
Dial and ##7 for Personal Speed Dial) are no longer available. You must use the
User Programmable Feature steps for Speed Dial instead.
User Programmable Features
Feature Mnemonic
DSS
Headset
Hotline
Line Keys
#OHS
Voice Over
#RC
# + R C + Press Call Coverage key
repeatedly to select ringing mode
#BLF Installing a DSS Con-
See DS1000:
sole
(page 65) or DS2000:
a DSS Console
using this option.
#BLF + Press DSS key + HOLD + Enter
extension + VOL Up + Program another
key or SPK to exit.
#RG
# + R G + Press Group Call Pickup key
repeatedly to select ringing mode
#HS #HS + Y to enable or N to disable + SPK
to exit
#HL
#HL + Press flashing Hotline key + Enter
extension for new Hotline partner +
HOLD + Program another Hotline key or
SPK to exit.
#RL
# + R L + Press Line Key repeatedly to
select ringing mode
#OHS + Select mode ( C =Outside line,
D =Hotline, I =ICM) + Select option (see
below) + SPK to exit.
Outside line options: C =Camp On tone,
O =Off Hook Ringing, 0 = None
Intercom options: C =Camp On, V =Voice
Over, 0 = None
Hotline Options: C =Camp On, 0 = None
#VP + Y to enable or N to disable + SPK
#VP
to exit.
#PLA
#PLA + Press one of your flashing pro-
grammable keys or ICM + SPK to exit.
Using Your Telephone
Operation
Installing
(page 110) before
DS1000/2000 Workbook
Access Level
N/A
1-5
N/A
3-5
3-5
N/A
3-5
3-5
3-5
15