NEC DS1000 Correspondence Course Workbook page 137

NEC America
DS1000/2000 Correspondence Course
5. Enter key code and options as required +
OR
Press to leave the current assignment unchanged
VOL
OR
Press ICM +
VOL
To scroll through the available entries instead of entering a code in this step:
1. Press ICM (your ICM key flashes fast).
2. Press VOL OR VOL
3. Press HOLD to assign the displayed entry to the key.
You automatically advance to the next consecutive key.
6. Enter data for another key.
OR
Press to return to step 4 and select another key to program.
CONF
OR
Press twice to return to step 3 and select another extension to program.
CONF
OR
Press three times to exit the program.
CONF
VOL
to scroll.
until the entry you want displays.
System Programming
.
DS1000/2000 Workbook 137