NEC DS1000 Correspondence Course Workbook page 150

DS1000/2000 Correspondence Course
System Programming
Step 5: Should extension have line keys for answering trunk calls?
Step 6: Should DSS Console have line keys for answering trunk calls?
Step 7: While on a trunk call, is a user's conversation transmitted to the caller at a comfort-
able level?
Step 8: While on a trunk call, is the conversation received by the user at a comfortable
level?
150 DS1000/2000 Workbook
Step-by-step guide for setting up Central
Office Calls, Answering (Sheet 2 of 3)
Delay Ring
If yes
If no
If yes
If no
If yes
If no
If yes
If no
• In Program 1805 - Ring Assignment enter 4 for
each trunk that should delay ring during the day
and at night.
• In Program 0401 - Trunk Delay Ring enter the
interval after which a delay ring trunk will change
from flashing to ringing.
• In Program 1701 - Line Key assign programmable
keys as line keys (code 03). The options are 01-48
(trunks 1-48).
• In Program 1701 - Line Key make sure no keys
are assigned as line keys (code 03).
• In Program 1701 - Switched Loop Key or in Pro-
gram 1701 - Fixed Loop Key assign a loop key to
any extension without line keys. This allows the
extension to answer trunk calls.
• In Program 1704 - Line Key assign programmable
keys as line keys (code 03). The options are 01-48
(trunks 1-48).
• In Program 1704 - Line Key make sure no keys
are assigned as line keys (code 03).
• In Program 1001 - Trunk/Transmit Gain leave
this option at its current setting.
• In Program 1001 - Trunk/Transmit Gain increase
or decrease the trunk transmit gain for the opti-
mum transmission level for the connected telco or
PBX.
• In Program 1001 - Trunk/Receive Gain leave this
option at its current setting. The setting is applied
to each line seizure.
• In Program 1001 - Trunk/Receive Gain increase
or decrease the trunk receive gain for the opti-
mum reception level for the connected telco or
PBX. The setting is applied to each line seizure.
NEC America