NEC DS1000 Correspondence Course Workbook page 145

Program 9999 - System Initialization
NEC America
DS1000/2000 Correspondence Course
This program will allow you to initialize the system database. Ini-
tializing the system erases all your programmed entries and
replaces them with the factory-installed default values, so make
sure this is what you want to do!!
1. Enter the programming mode.
You must be using the Installer's password - the System Administra-
tor 1 and 2 passwords will not allow you to use Program 9999.
2. 9999 +
HOLD
9999:INITIALIZATION
INITIALIZE SYS?nnn
3. Enter Y + to initialize the system.
HOLD
OR
Enter N + to exit the program without initializing.
HOLD
If you enter Y, the system will initialize with the factory-installed
default and return to the idle state.
System Programming
DS1000/2000 Workbook 145