NEC DS1000 Correspondence Course Workbook page 130

DS1000/2000 Correspondence Course
System Programming
Logging On with this Password:
System Administrator 1 (level 1)
System Administrator 2 (level 1)
How to Exit the Programming Mode
130 DS1000/2000 Workbook
Password = 0000
Password = 9999
Installer (level 3)
Password - 372000
To exit the programming mode:
1. When you see:
USER: nnn
ENTER PROGRAM?
OR
nnnnn VER nn.nn.nn
PASSWORD:
Press and release the hookswitch.
OR
Press SPK .
If you don't see one of the above prompts, press CONF until you do.
When you exit programming, the system automatically stores your
entries in Random Access Memory (RAM).
Gives you access to these programs:
Program 0302 - System Identification
Program 1101 - System Speed Dial Numbers
Program 0302 - System Identification
Program 0801 - Selectable Display Messages
Program 1101 - System Speed Dial Numbers
Program 1701 - Programmable Function Key Assignments
Program 1702 - Personal Speed Dial
Program 1703 - DSS Key Assignment
Program 1704 - DSS Console Key Assignment
All
NEC America