NEC DS1000 Correspondence Course Workbook page 129

Programming the System
How to Program Through the Telephone
NEC America
DS1000/2000 Correspondence Course
Programming can be done from any display telephone
Press the VOL UP or VOL DOWN keys to scroll through programs
Press the HOLD key to enter the desired program
The PC Card does not need to be installed in the CPU for program-
ming; it only needs to be installed if you wish to back-up or restore
the site data.
1. Go to any working display telephone.
In a newly installed system, use extension 300 (port 1).
2. Do not lift the handset.
3. Press .
ICM
4. # * # *
LCCPU VER nn.nn.nn
Enter Password:
5. Dial the system password +
Refer to the following table for the default system passwords. You
should use the Installer's password. The System Administrators'
passwords are restricted and cannot access all programs.
Password Level
System Administrator 1
System Administrator 2
Installer
To change the passwords, use Program 9905. Refer to the DS1000/
2000 Software Manual for complete details.
USER: nnn
ENTER PROGRAM?
System Programming
HOLD
Password
0000
9999
372000
DS1000/2000 Workbook
Level
1
2
3
129