Contrast Settings; Figure 8: Set Font Size 2; Figure 9: Contrast Settings - KEB COMBIVERT G6 Programming Manual

bASIC SeTTINGS
Figure 8:

4.4 Contrast settings

Figure 9:
Language english
Start mode CP
mode
Font size 13
Font size 2 16
Contrast 21
Font size 2
16
Menu
Set font size 2
Language english
Start mode CP Mode
Font size 13
Font size 2 16
Contrast 21
Contrast
21
Menu
Contrast settings
The font size 2 determines the display
size of the parameter values in CP mode.
Press <ENTER> to switch into the input
mode to change the parameter value.
With the keys <▲> and <▼> select one
of the following font sizes:
• 8, 10, 13, 16, 24
<ENTER> selects the desired font size
and jumps back into the "Settings" sub-
menu.
Sets the contrast level of the LC display.
Press <ENTER> to switch into the input
mode to change the parameter value.
With the keys <▲> and <▼> set the con-
trast level from 0...50. Use the contrast
bar on the bottom of the toolbar to control
the settings.
<ENTER> stores the specified contrast
setting and returns to the "Settings" sub-
menu.
15