Sw1 Switch-Pack Settings For Vac/16 Boards (All Board Positions); Default Jumper Settings For Vac/16 Boards (All Board Positions) - Data General AViiON Series Customer Documentation

Configuring VME Option Boards
Table 2–1 SW1 Switch-Pack Settings for VAC/16 Boards (All Board Positions)
Switch
SW1
Table 2–2 Default Jumper Settings for VAC/16 Boards (All Board Positions)
Jumper Pins
E3 1–2
3–4
5–6
7–8
9–10
11–12
13–14
E4 2–3
E5 2–3
E6 2–3
E7 1–2
3–4
E8 1–2
E9 1–2
E10 1–2
E11 1–2
E12 1–2
E13 1–2
E14 1–2
E16 2–3
E17 1–2
3–4
5–6
7–8
9–10
11–12
13–14
15–16
Notation
In
Out
Note 1: These interrupt jumpers operate with E21, E22, and E23.
Note 2: These jumpers installed for convenience. They have no meaning
unless E12 is in.
2-6
No. Setting Function
1 Off Reserved
2 On Self test
3 Off Self test
4 Off Self test
5 Off Self test
6 Off Reserved
7 Off Long word transfer
8 Off Reserved
Status Function
Out Interrupt request 1; see Note 1
Out Interrupt request 2; see Note 1
Out Interrupt request 3; see Note 1
In Interrupt request 4; see Note 1
Out Interrupt request 5; see Note 1
Out Interrupt request 6; see Note 1
Out Interrupt request 7; see Note 1
In BG 0 primary jumper
In BG 1 primary jumper
In BG 2 primary jumper
In BG 3 (selected level)
In BG 3 (selected level)
Out Bus request 0
Out Bus request 1
Out Bus request 2
In Bus request 3 (selected level)
Out Extended addressing
Out Extended addressing
In DPRAM super space
In 27256 EPROMS
In Address bit A13; see Note 2
In Address bit A12; see Note 2
In Address bit A11; see Note 2
In Address bit A10; see Note 2
In Address bit A9; see Note 2
In Address bit A8; see Note 2
Out Unused
Out Unused
Indicates
Jumper installed.
Jumper removed.
(Continued)
014–001867