Data General AViiON Series Customer Documentation page 132

Connecting External Devices to VME Option Boards
Drop cable (side view)
Cable connector (male)
Figure 4–38 Aligning Slide Clip Mounts with a LAN Connector
4. Push the edge of the slide clip into position, so the small mount slot surrounds
its cable connector mount. Figure 4–39 illustrates how to secure a slide clip
connection.
Mount slot
(large)
VLCi board
air dam
Mount slot
(small)
Figure 4–39 Securing a LAN Drop Cable to a VLCi Connector
If you haven't already connected the remote end of the cable to your transceiver, do
so now. Refer to the device-specific documentation for your transceiver, if necessary.
When you finish connecting all external devices to your system, refer to your
starting manual for instructions on powering up your system. You should then refer
to your operating system documentation for instructions on what to do after booting
or rebooting your system hardware.
4-32
Slide clip mounts
Connector pins
1–15
Cable connector mount
Cable connector mount
Slide clip
014–001867