Preface - Siemens SIMATIC Ident Function Manual

Introduction

1.2 Preface

1.2 Preface
Purpose of this document
This Function Manual contains all the information needed to configure and commission the
system.
It is intended both for programming and testing/debugging personnel who commission the
system themselves and connect it with other units (automation systems, further
programming devices), as well as for service and maintenance personnel who install
expansions or carry out fault/error analyses.
Conventions
The following terms/abbreviations are used synonymously in this document:
● Reader, read/write device, write/read device
● Transponder, mobile data memory, MDS
● Communications module, CM, interface module, ASM
Validity of this documentation
This documentation is valid for FB 45. The documentation describes the product shipped as
of September 2011.
History
Previous edition(s) of these operating instructions:
Edition
05/2005
03/2006
10/2009
07/2012
8
Note
First Edition
Inclusion of the RF170C communication module
Parameter assignment of the RF620R/RF630 reader.
RF300 and ISO transponders
The document is expanded by RF200.
Various interface modules as well as MOBY I and MOBY E have been
omitted.
FB 45 for MOBY U, MOBY D, RF200, RF300
Function Manual, 07/2012, J31069-D0166-U001-A4-7618