Siemens SIMATIC Ident Function Manual page 75

UDT 101: Result of transponder status
Table 6- 3 UDT 101 "MOBY transponder status"
Address Name
0.0
+0.0 UID
+4.0 MDS_type
+6.0 sum_subframe_access
+10.0 sum_searchmode_access
+12.0 ST_date_Week
+13.0 ST_date_Year
+14.0 battery_left
+16.0 ST
=18.0
UDT 111: Result of reader status (mode 1)
Table 6- 4 UDT 111 "MOBY SLG Status"
Address Name
0.0
+0.0 status_info
+1.0 hardware
+2.0 hardware_version
+4.0 loader_version
+6.0 firmware
+8.0 firmware_version
+10.0 driver
+12.0 driver_version
+14.0 interface
+15.0 baud
+16.0 reserved1
+17.0 reserved2
+18.0 reserved3
+19.0 distance_limiting_SLG
+20.0 multitag_SLG
+21.0 field_ON_control_SLG
+22.0 field_ON_time_SLG
+23.0 sync_SLG
+24.0 status_ant
+25.0 stand_by
+26.0 MDS_control
=28.0
FB 45 for MOBY U, MOBY D, RF200, RF300
Function Manual, 07/2012, J31069-D0166-U001-A4-7618
Type Comment
STRUCT
DWORD Tag (unique identifier)
BYTE Tag
DINT Sum of subframe access
INT Sum of searchmode
BYTE Date of last sleep-time change (week of year)
BYTE Date of last sleep-time change (year)
INT Battery left (percentage)
BYTE Set Sleep_time value on tag
END_STRUCT
Type Comment
STRUCT
BYTE Reader mode
CHAR Type of hardware
WORD HW version
WORD Version of loader
CHAR FW
WORD Firmware version
CHAR Type of driver
WORD Version of driver
BYTE Interface (RS 232/RS 422)
BYTE Baud rate
BYTE Reserved
BYTE Reserved
BYTE Reserved
BYTE Ranges/performance setting
(RF200/RF300: res.)
BYTE Multitag reader
BYTE BERO operating mode
(RF200/RF300: res.)
BYTE MOBY U: BERO time
MOBY D: transponder type
((RF200/RF300: ISO transponder type)
BYTE Semaphore control (synchronization with reader)
(RF200/RF300: res.)
BYTE Status of antenna
BYTE Standby time after a command was executed
(RF200/RF300: res.)
BYTE Presence
END_STRUCT
Examples/applications
6.7 The UDTs of FB 45 / FC 45
75