Preface - Siemens SIMATIC Ident Function Manual

Preface

Warranty and Liability
The application examples are not binding and do not claim to be complete regarding the
configuration and equipment and any eventuality. The application examples do not represent
customer-specific solutions. They are only intended to provide help for typical applications.
You are responsible for ensuring that the described products are used correctly These
application examples do not relieve you of the responsibility to use safe practices in
application, installation, operation and maintenance. When using these application
examples, you recognize that we cannot be made liable for any damage/claims beyond the
liability clause described. We reserve the right to make changes to these application
examples at any time without prior notice. If there are any deviations between the
recommendations provided in these application examples and other Siemens publications –
e.g. Catalogs – the contents of the other documents have priority.
We do not accept any liability for the information contained in this document.
Any claims against us – based on whatever legal reason – resulting from the use of the
examples, information, programs, engineering and performance data etc., described in this
application example shall be excluded. Such an exclusion shall not apply in the case of
mandatory liability, e.g. under the German Product Liability Act ("Produkthaftungsgesetz"), in
case of intent, gross negligence, or injury of life, body or health, guarantee for the quality of a
product, fraudulent concealment of a deficiency or breach of a condition which goes to the
root of the contract ("wesentliche Vertragspflichten"). The damages for a breach of a
substantial contractual obligation are, however, limited to the foreseeable damage, typical for
the type of contract, except in the event of intent or gross negligence or injury to life, body or
health. The above provisions do not imply a change of the burden of proof to your detriment.
Any form of duplication or distribution of these application examples or excerpts hereof is
prohibited without the expressed consent of the Siemens AG.
Ident profile, Add-on instruction for Rockwell systems
Function Manual, 01/2019, C79000-G8976-C410-03
3