Siemens SIMATIC Ident Function Manual page 49

Error code
(B#16#...)
FB 45 for MOBY U, MOBY D, RF200, RF300
Function Manual, 07/2012, J31069-D0166-U001-A4-7618
Flashing of
ERR LED
03 3x Error in the connection to the reader. The reader is not answering.
•
•
•
•
•
•
•
04 4x Error in tag memory
The tag has never been written to or has lost the contents of its
memory due to battery failure.
•
•
05 5x Unknown command
FB 45 is sending an uninterpretable command to the CM.
•
•
•
06 6x Field disturbance on reader
The reader is receiving interference pulses from the environment.
•
•
•
•
•
07 7x Too many transmit errors
The tag could not receive the command or the write data from the CM
correctly even after several attempts.
•
•
The cable between the CM and reader is wired incorrectly or there
is a cable break
The 24 V supply voltage is not connected or is not turned on or has
failed briefly
The automatic fuse on the CM has blown
The hardware is defective
Another reader is in the vicinity and is active
Coupled interference on reader - or PROFIBUS cable
After eliminating the problem, run init_run
Replace tag (possibly defective)
Reinitialize tag (see section Parameterizing (Page 19)).
Command_DB contains invalid command parameters.
The command_DB was overwritten by the user
The tag has signaled an address error
External interference field
There is not enough distance between two readers and this does
not correspond to the configuration guidelines
The connecting cable to the reader is subject to interference, is too
long or does not comply with the specification
MOBY U: Tag has left the field during communication.
MOBY U: Communication between reader and tag was aborted
due to a disruption (e.g. person/foreign body moving between
reader and tag).
The tag is positioned exactly in the boundary area of the
transmission window
The data transmission to the tag is being disrupted by external
interference.
Error messages and troubleshooting
5.2 Error messages
Description
49