Standard Settings - KERN ABT Series Operating Instructions Manual

C02 High-stability mode setting
C13 Anti-convection mode setting
C14 Standard mode setting
Standstill display,
C05
setting to 1 count
Standstill display,
C06
setting to 5 count
Standstill display,
C15
setting to 10 count
C07
C08
C10 Autom. CAL on
C11 Autom. CAL off
C17 Display setting status

15.4 Standard Settings

Display
for menu
selection
Standard set-
iF:F1
ting 1
Standard set-
iF:F2
ting 2
Standard
iF:F3
setting 3
Standard set-
iF:F4
ting 4
Operator
settings iF:USEr
(see 15.5)
KERN–
iF:USEr
YKB-01N
Selecting one of standard Settings:
Repeatedly press the [CAL] key until "intFACE" appears.
Press [TARE] key
Repeatedly press the [CAL] key until the desired standard setting
appears.
Confirm your selection by pressing the [TARE] key.
Repeatedly press the [ON/OFF] key. The balance returns to toler-
ance weighing mode.
66
Auto Zero on
Auto zero off
Measurement conditions set by menu selection in abbre-
viated form is output.
Baud
Delimiter
Rate
1200 C/R
1200 C/R
2400 C/R+L/F
1200 C/R+L/F
User User
settings settings
1200 C/R
Parity
(Bit Stop bit
length)
None (8) 1
None (8) 1
Even (7) 1
Odd (7) 1
User User
settings settings
None (8) 1
ABT-BA-e-1312
Data Hand-
format shake
dF1 Hardware
dF2 Hardware
dF3 Hardware
dF4 Hardware
User User set-
settings tings
dF1 off