Change-Over Button (Standard Settings); Switch-Over Weighing Unit - KERN CKE 6K0.02 Operating Instructions Manual

8.4 Change-over button (standard settings)

The change-over button
The following functions are set as per standard (<default>):
Short key pressing
➢ When pressed for first time: Set
count
➢ Switch-over between the
For more setting options please see the setup menu under < buttons>,
see chap. 10.3.1.
The standard settings (<default>) for the application <Counting> are described
below.
8.4.1

Switch-over weighing unit

As per standard the change-over button
between the weighing units by shortly pressing.
Switch over unit:
24
can be allocated with different functions.
reference quantity, see chap.
9.2.1, 9.2.2, 9.2.3
weighing units
is set so that is it possible to switch-over
 Using
Long key pressing
➢ When the balance has been tared
and the weighing unit is displayed,
you can change the display
between gross weight, net weight
and tare weight by pressing the
button long time.
button, it is possible to switch
over between the enabled unit 1 and
unit 2.
TCKE-A/-B-BA-def-2333