Change-Over Button (Standard Settings) - KERN PCB Operating Instructions Manual

8.5 Change-over button (standard settings)

The change-over button
The following functions are set as per standard (<default>) in the different
weighing applications:
Weih
count
check
For more setting options please see the setup menu under < buttons >,
see chap. 13.3.1.
The standard settings (<default>) for the <Weighing> application are described
below.
26
can be allocated with different functions.
Short key pressing
➢ When pressed for first time:
Setting weighing unit
➢ Switch-over between the
weighing units
➢ When pressed for first time:
Setting the reference quantity
➢ Switch-over between the
weighing units
➢ When pressed for first time:
Setting weighing unit
➢ Switch-over between the
weighing units
Long key pressing
➢ Display gross weight value
➢ When the balance has been tared
and the weighing unit is displayed,
you can change the display
between gross weight, net weight
and tare weight by pressing the
button long time.
➢ When the balance has been tared
and the weighing unit is displayed,
you can change the display
between gross weight, net weight
and tare weight by pressing the
button long time.
TPCB-A-BA-e-2314