Setting Time - KERN ABT Series Operating Instructions Manual

13.5 Setting time

Balances of the series ABT are equipped with an integrated clock. Set the clock be-
fore using the functions Clock-CAL (ch. 8.2) or GLP log (ch. 10). Note that the cur-
rent time is displayed at the stand by status (ch. 7.5.1).
Press the [CAL] key repeatedly until "SettinG" appears.
Press the [TARE] key.
Repeatedly actuate the [CAL] key until "t-HH.MM" appears (HH
and MM provide 2 digits each for hour and minute display).
Press the [TARE] key. The currently set time appears. In the up-
per part of the display panel, the
appear in order to indicate numerical input status. The leftmost
digit blinks.
When the [UNIT] key is pressed, the numerical of the blinking digit
increases by 1 at a time. You can determine the value of the flash-
ing digit, or shift the flashing digit by one position to the right, by
pressing the [PRINT] key. Confirm your setting by pressing the
[TARE] key.
To exit the function, press the [ON/OFF] key.
Brief actuation of ON/OFF key:
Back to previous menu.
Long actuation of ON/OFF key:
Back to weighing mode.
52
symbol and the # symbol
ABT-BA-e-1312